Posted: 1/11/2011 13:12:36
EAA needs members to review a builder
product specifically related to installing Adel Clamps. To volunteer,
simply click the green "reply" button below and say you want to
volunteer. I’ll be selecting the testers (randomly) on 1/18/2010 and
closing this thread at that time. If you are selected, I will send you a
private message or email with the details.
Requirements to participate in
- You have “Adel” clamps to install or remove and
- You have time to test the product in the next 30 days.
- You must complete a short product review after using
- You must be an EAA member.
- You get to keep the product after you are done
If we select your review comments for
the Member Tested section of the magazine, we will print your name unless you
We’ll be having other opportunities
to test products coming up so keep checking back to www.oshkosh365.org
forums for more posts. You’ll see the outcome of this test work in an
upcoming issue of Sport Aviation under Member Tested.
Thanks for volunteering,
Director, EAA Member Programs
Built Sonex, Own J-3 Cub
Posted: 1/11/2011 15:24:00
In the final stages of my project. I would like to try the product for adel clamps.
Posted: 1/11/2011 18:11:12
I would love to test it. Working on an Ercoupe and L2M rebuild right now.
Who me? I was fishing on the day in question Mr FAA man. Nope must have been another bright yellow plane.
Posted: 1/11/2011 23:14:20
I regularly use adel clamps when at work, I would love to test a specialized tool out. I could even loan it around the shop, there are about 4 or 5 guys that could try it out here.
Posted: 1/12/2011 11:02:22
I'll give it a shot. They always seem to be aggravating little devils.
Posted: 1/12/2011 12:45:54
Posted: 1/12/2011 13:31:29
I would like to test it. I meet all the requirements.
Posted: 1/12/2011 15:06:12
Not just yes I'll be glad to test it, but he!! yeah! Adel clamps are a pain, and anything that will help install them would be a huge bonus for anyone having to install just one.
Posted: 1/12/2011 19:15:02
Please sign me up for this one! I'm installing all the lines etc. on my Sonex at this time and could really use it!!!
Posted: 1/13/2011 08:54:05
I am all over this on! Please count me in!
Posted: 1/13/2011 19:21:15
If there is a way to install an Adel clamp with less than three hands, I want to try it.
Posted: 1/13/2011 19:23:21
I'd like to volunteer. We're getting ready to install some clamps into the Algie LP1 prototype...here's to hoping that fast just got faster!
Posted: 1/13/2011 19:28:31
Building a Lancair Legacy and actually built my own adel clamp tool so would love to test out someone elses
Posted: 1/13/2011 19:31:22
Please add me to the list.
If this thing works, it should sell a million.
Posted: 1/13/2011 19:33:37
I'll try anything to make working with them little buggers easier. I volunteer!
Posted: 1/13/2011 19:43:34
I am currently in the process of changing my engine, so I will be working a bunch of Adel clamps. Let me know if I can help.
Posted: 1/13/2011 19:46:30
I am finishing up my RV 8. Adel clamps everywhere and rarely one that goes in easy. I would really like to try a new tool. The best one yet I have found is Avery Tool's.
Posted: 1/13/2011 19:54:37
I would like to test your Adel clamp tool I own an Aircraft Restoration shop so I get to do a lot of Adel clamps and would be able to give a good workout.
Posted: 1/13/2011 19:58:14
I'd like to test the Adel clamp tool. I work with Adel clamps almost daily at work.
Posted: 1/13/2011 20:33:19
Hello Charlie. Your product sounds interesting. I woul dlike to be considered for one of your trial members. I am restoring an abused Kitfox IV. Thank you, Charles